Centre for Nanomaterials

	A Castellero, S J Lloyd, Shantanu V Madge, Z Kovacs, J F Loffler, M Baricco and A L Greer, “Sheer-band Propagation in Full Amorphous and Partly Crystallized Mg-based Alloys Studied by Nanoindentation and Transmission Electron Microscopy”, Journal of Alloys and Compounds, Vol. 434, Special Issue p 48-51, 2007
	A I Khovavko, D N Fedorov and Malobika Karanjai, “Thermodynamic Evaluation of Reduction of Silica in the Presence of Iron”, Transactions of Powder Metallurgy Association of India , Vol. 28, p 64, 2002
	A I Khovavko, Malobika Karanjai, A M Svietenko and D N Fedorov, “Study of Reduction Kinetics of Blue Dust”, Powder Metallurgy in Automotive Applications-II, p 95-104, 2002
	A Venugopal Rao, A Dutta and R. Sundaresan, “Modeling Approach to Design in Impression Die Forging”, Proceedings of X-ISME Conference on Mechanical Engineering, New Delhi, 1996
	B I Bondarenko, D N Fedorov, A I Khovavko, Malobika Karanjai, R. Sundaresan and A Shivakumar, “Study of Soft Magnetic Iron Powder Production”, Proceedings of Euro PM2000-Soft Magnetic Materials Workshop, Munich, p 103-109, 2000
	B Sarma and R. Sundaresan (eds.), “Productivity in PM - A Paradigm Shift”, Proceedings of the one day workshop (PMAI) , Hyderabad, 1999
	Book entitled “Diamond Electrochemistry”, (eds.) A Fujishima, Y Einaga, Tata Narasinga Rao and D A Tryk, Elsevier-Amsterdam, BKC –Tokyo, 2005
	D Fedorov, B I Bondarenko, Y Pokolyto, A Sviatenko, A Sivakumar and Malobika Karanjai, “Investigation of Annealing Parameters Influence on Quality of Iron Powder Obtained out of Indian Ore Concentrate”, Ekotekhnologii I Resursosberezhenie, Vol. 5, p 20-26, 1999
	D N Fedorov, B I Bondarenko, E P Pokotilo, A M Sviatenko, A Shivakumar and Malobika Karanjai, “Study of the Obtaining Process of Reduced Low Carbon Iron Powder from Hematite by Method of Frozen Furnace”, Poroshkovaya Metallurgiya, Vol.3/4, p 115-122, 2002
	D N Fedorov, B I Bondarenko, Malobika Karanjai and Siva Kumar, “Study of Obtaining the Process of Reduced Low Carbon Iron Powder from Hematite by Method of Frozen Furnace”, Powder Metallurgy, Vol.3/4, p 212-218, 2002
	D N Fedorov, Malobika Karanjai and A Sivakumar, “Development of Technologies to Produce Iron-Based Powders from Indian Blue Dust”, Proceedings of Euro PM2004- Powder Manufacturing and Processing, (eds.) H Danninger and R Ratzi, p 105-110, 2004
	D N Fedorov, Malobika Karanjai, R. Sundaresan and A Sivakumar, “Selection of Alloying Method to Produce Iron base Powder”, Poroshkovaya Metallurgia, Vol. 5/6, p 8-13, 2005
	D N Fedorov, Malobika Karanjai, R. Sundaresan and A Sivakumar, “Selection of Alloying Method to Produce Iron-Based Powder”, Powder Metallurgy and Metal Ceramics, Vol. 44(5-6), p 211-215, 2005
	D. Roy, Dibyendu Chakravarthy, R. Mitra and I. Manna “Effect of Sintering on Microstructure and Mechanical Properties of Nano TiO2 Dispersed Al65Cu20Ti15 Amorphous / Nanocrystalline Composites”, Journal of Alloys and Compounds (In press)
	D. Sivaprahasam, G. Sivakumar, R. Vijay and R. Sundaresan, “Mechanically Alloyed Fe-SiC Powder for Detonation Spray Coating”, Proceedings of International Conference on Trends in Mechanical Alloying, (eds.) P R Soni and T V Rajan, Jaipur, India, p 84-95, 2001
	D. Sivaprahasam, S. B. Chandrasekhar and R. Sundaresan “Microstructure and Mechanical Properties of Nanocrystalline WC-12Co Consolidated by Spark Plasma Sintering”, International Journal of Refractory Metals and Hard Materials, Vol. 25, p 144-152, 2007
	Dibyendu Chakravarthy, S. Bysakh, K. Muraleedharan, Tata Narasinga Rao and R. Sundaresan “Spark Plasma Sintering of MgO Doped Alumina with High Hardness and Fracture Toughness”, Journal of the American Ceramic Society, Vol. 91(1), p 203-208, 2008
	Dibyendu Chakravarty, P Singh, S Singh, D Kumar and Om Prakash, “Electrical Conduction Behavior of High Dielectric Constant Perovskite Oxide LaxCa1-3x/2Cu3Ti4O12”, Journal of Alloys and Compounds, Vol. 438(1-2), p 253-257, 2007
	Dibyendu Chakravarty, S Roy and P K Das, “DC Resistivity of Alumina and Zirconia Sintered with TiC”, Bulletin of Materials Science, Vol. 28(3), p 227-231, 2005
	G V S N Rao, M H Rao, S B Chandrashekar and R. Sundaresan, “Influence of Hot Dip Galvanizing on Corrosion Protection of Sintered Ferrous Components”, Transactions of Indian Institute of Metals, Vol. 59(3), p 423-429, 2006
	G. Sundararajan and Tata Narasinga Rao, ( Guest eds.) Special Issue for National Review and Coordination Meeting on Nanoscience and Nanotechnology, ARCI Hyderabad, 2007 (In press)
	Kaliyan Hembram, R. Vijay, Y. Srinivasa Rao and Tata Narasinga Rao “Doped Nanocrystalline ZnO Powders for Non-Linear Resistor Applications by Spray Pyrolysis Method", Journal of Nanoscience and Nanotechnology (In press)
	M C Somani, S K Gupta, M K Rohatgi, W Krishnaswamy, N Srinivasan, G G Saha and R. Sundaresan, “Evaluation of Isothermal / Hot Die Forging Route for the Development of Near-Net Shape Discs in Titanium Alloy IMI–685”, Proceedings of National Seminar on Titanium Alloys and Super Alloys, Hyderabad, 1996
	Malobika Karanjai, B.V. Manoj Kumar, R.Sundaresan, B. Basu, T.R. Rama Mohan and B.P. Kashyap, “Fretting Wear Study on Ti-Ca-P Biocomposite in Dry and Simulated Body Fluid”, Materials Science and Engineering A Vol.475, p 299-307, 2008
	Malobika Karanjai, D N Fedorov and A Sivakumar, “Iron Based Alloy Powder Fe-P for Soft Magnetic Application by a Thermo-Chemical Process”, Transactions of Powder Metallurgy Association of India , Vol. 28, p 22, 2002
	Malobika Karanjai, R. Sundaresan, G. V. Narasimha Rao, T. R. Rama Mohan and B.P. Kashyap “Development of Titanium Based Bio-Composite by Powder Metallurgy Processing with In-situ Forming of Ca-P Phases”, Materials Science and Engineering A, Vol. 447, p 19-26, 2007
	Malobika Karanjai, R. Sundaresan, T. R. Rama Mohan and B. P. Kashyap “Evaluation of Growth of Calcium-Phosphate Ceramics on Sintered Ti-Ca-P Composites”, Material Science and Engineering C:, (In press)
	N Kumar, K Muraleedharan, P R Soni and R. Sundaresan, “Synthesis of Dispersion Strengthened Copper by Mechanical Alloying and Reaction Milling”, International Journal of Powder Metallurgy, Vol. 40(4), p 41-46, 2004
	N V Rama Rao, R Gopalan, M Manivel Raja, V Chandrasekaran, Dibyendu Chakravarty, R. Sundaresan, R Ranganathan and K Hono, “Structural and Magnetic Studies on Spark Plasma Sintered SmCo5/Fe Bulk Nanocomposite Magnets”, Journal of Magnetism and Magnetic Materials, Vol. 312, p 252-257, 2007
	N. V. Rama Rao, P. Saravanan, R. Gopalan, M. Manivel Raja, D. V. Sreedhara Rao, D. Sivaprahasam, P. Ranganathan and V. Chandrashekaran “Microstructure, Magnetic and Mossbauer Studies on Spark-Plasma Sintered Sm-Co-Fe/Fe (Co) Nanocomposite Magnets”, Journal of Physics D: Applied Physics Vol. 41, 065001, 2008
	P. Muthukumar, M. Prakash Maiya, S. Srinivasa Murthy, R. Vijay and R. Sundaresan “Tests on Mechanically Alloyed Mg2Ni for Hydrogen Storage”, Journal Alloys and Compounds, Vol. 452(2), p 456-461, 2008
	R H Tian, Tata Narasinga Rao, Y Einaga and J F Zhi, “Construction of Two-Dimensional Arrays Gold Nanoparticles Monolayer onto Boron-Doped Diamond Electrode Surfaces”, Chemistry of Materials, Vol. 18(4), p 939-945, 2006
	R S Sidhu, Shantanu V Madge, X Deng and N Chawla, “On the nature of the interface between Ag3Sn Intermetallics and Sn in Sn-3.5Ag Solder Alloys”, Journal of Electronic Materials, Vol. 36(12), p 1615-1620, 2007
	R. Vijay, G. V. Narasimha Rao, R. Sundaresan, M P Maiya and S S Murthy, “Sorption Characteristics of Mg-x wt% MmNi5(x=10-50) Nanostructured Composites Prepared by Mechanical Alloying”, Proceedings of International Conference on Solid State Hydrogen Storage-Materials and Applications, Hyderabad, India, 2005
	R. Vijay, R. Sundaresan, G. V. Narasimha Rao, M P Maiya and S S Murthy, “Hydrogen Storage Characteristics of Mg17Al12 Compound and Mg-10% Al Composition Prepared by Mechanical Alloying”, Proceedings of International Hydrogen Energy Congress and Exhibition (IHEC), Turkey, p 1-7, 2005
	R. Vijay, R. Sundaresan, M P Maiya and S S Murthy, “Comparative Evaluation of Mg-Ni Hydrogen Absorbing Materials Prepared by Mechanical Alloying”, International Journal of Hydrogen Energy, Vol.30, p 501-508, 2005
	R. Vijay, R. Sundaresan, M P Maiya and S S Murthy, “Hydrogen Storage Properties of Mg-Cr2O3 Nanocomposites: The Role of Catalyst Distribution and Grain Size”, Journal of Alloys and Compounds, Vol 424, p 289-293, 2006
	R. Vijay, R. Sundaresan, M P Maiya, S S Murthy, Y Fu, H P Klein and M Groll, “Characterization of Mg-x wt% FeTi (x=5–30) and Mg–40 wt.% FeTiMn Hydrogen Absorbing Materials Prepared by Mechanical Alloying”, Journal of Alloys and Compounds, Vol. 384, p 283-295, 2004
	R. Vijay, R. Sundaresan, M. P. Maiya and S. Srinivasa Murthy “Application of Mg-x wt% MmNi5 Nanostructured Composites in a Hydrogen Storage Device”, International Journal Hydrogen Energy, Vol.32, p 2390-2399, 2007
	S Kumaran, T Raghu and R. Sundaresan, “Synthesis of Nanocomposite Al-Ni-MM-Zr-O-C Alloy”, Proceedings of International Conference on Powder Metallurgy PM-2000, 2001
	S. B. Chandrasekhar, V. Mahender, A Sivakumar and R. Sundaresan, “Effect of Atmosphere in the Sintering of Heavy Alloys”, Proceedings of Advances in Powder Metallurgy and Particulate Materials (MPIF- 2002), Florida, USA, Vol. 13, p 201-210, 2002
	T A Ivandini, Tata Narasinga Rao, A Fujishima and Y Einaga, “Electrochemcial Oxidation of Oxalic Acid at Highly Boron-Doped Diamond Electrodes”, Analytical Chemistry, Vol. 78(10), p 3467-3471, 2006
	T Raghu, R. Sundaresan, P Rama Krishnan and T R Rama Mohan, "High Strength High Conductivity Copper-Tungsten Composites by Mechanical Alloying”, Proceedings of International Conference on Powder Metallurgy PM-2000, 2001
	T Raghu, R. Sundaresan, P Ramakrishnan and T R Rama Mohan, “Synthesis of Nanocrystalline Copper Tungsten Alloys by Mechanical Alloying”, Material Science & Engineering A, Vol. 304-306, p 438-441, 2001
	T Raghu, R. Sundaresan, T R Ramamohan and P Ramakrishnan, “Mechanical Alloying of Immiscible Copper Tungsten”, Proceedings of 2000 Powder Metallurgy World Congress, (eds.) K Kosuge, H Nagai, p 1739-1744, 2000
	V. C. Sajeev, D. Sivaprahasam, A Sivakumar and R. Sundaresan, “The Origin of High Green Strength in Warm Compaction”, Powder Metallurgy in Automotive Applications- II, p 143-158, 2002

Centre for Engineered Coatings

	A Subrahmanyam, K Valleti, Shrikant V. Joshi and G. Sundararajan, “Effect of Arc Suppression on the Physical Properties of Low Temperature DC Magnetron Sputtered Tantalum Thin Films”, Journal of Vacuum Science Technology A, Vol. 25(2), p 378-382, 2007
	A. Subrahmanyam, K. Valleti, S.V. Joshi and G. Sundararajan, “The Effect of Arc Suppression on the Physical Properties of Low Temperature DC Magnetron Sputtered Tantalaum Thin Films”, Journal of Vacuum Science & Technology A, Vol. 25, p 378-382, 2007
	B Deo, R K Lingamaneni, A Dey and R Boom, “Strategies for Development of Process Control Models for Hot Metal Desulfurization :Conventional and Al Techniques”, Materials and Manufacturing Processes, Vol. 20, p 407-419, 2005
	B Rajasekaran, S G Sundara Raman, Shrikant V. Joshi and G. Sundararajan, “Effect of Detonation Gun Sprayed Cu-Ni-In Coating on Plain Fatigue and Fretting Fatigue Behaviour of Al-Mg-Si Alloy”, Surface & Coatings Technology, Vol. 201, p 1548-1558, 2006
	B. Rajasekaran, S. G. Sundara Raman, L. Ramakrishna, Shrikant V. Joshi and G. Sundararajan, “Influence of Microarc Oxidation and Hard Anodizing on Plain Fatigue and Fretting Fatigue Behaviour of Al-Mg-Si Alloy”, Surface & Coatings Technology, Vol. 202 (8), p 1462-1469, 2008
	B. Rajasekaran, S. G. Sundara Raman, S.V. Joshi and G. Sundararajan, “Effect of Grinding on Plain Fatigue and Fretting Fatigue Behaviour of Detonation Gun Sprayed Cu-Ni-In Coating on Al-Mg-Si alloy”, International Journal of Fatigue (in press)
	B. Rajasekaran, S. G. Sundara Raman, Shrikant V. Joshi and G. Sundararajan, “Effect of Micro Arc Oxidized Layer Thickness on Plain Fatigue and Fretting Fatigue Behaviour of Al-Mg-Si alloy”, International Journal of Fatigue, Vol. 30(7) p 1259-1266, 2008
	B. Rajasekaran, S. G. Sundara Raman, Shrikant V. Joshi and G. Sundararajan, “Performance of Plasma Sprayed and Detonation Gun Sprayed Cu-Ni-In Coatings on Ti-6Al-4V under Plain Fatigue and Fretting Fatigue Loading”, Materials Science Engineering., Vol. 479A, p 83-92, 2008
	B. Rajasekaran, S.G. Sundara Raman, S.V. Joshi and G. Sundararajan, “Influence of Detonation Gun Sprayed Alumina Coating on AA 6063 Samples under Cyclic Loading with and without Fretting”, Tribology International, Vol. 41, p 315-322, 2008
	B. X. J. Chen, L. G. Yu, K. A. Khor and G. Sundararajan, “The Effect of Boron-Pack Refreshment on the Boriding of Mild Steel by the SPS Process”, Surface & Coatings Technology, Vol. 202, p 2830-2836, 2008
	D K Das, V Singh and Shrikant V. Joshi, “ Effect of Al Content on Microstructure and Cyclic Oxidation Performance of Pt-Aluminide Coatings”, Oxidation of Metals, Vol. 57(3-4), p 245-265, 2002
	D K Das, V Singh and Shrikant V. Joshi, “High Temperature Oxidation Behaviour of Directionally Solidified Nickel base Super Alloy CM-247LC”, Materials Science and Technology, Vol.19(6), p 695-708, 2003
	D. Srinivasa Rao, “Prospective Applications of Thermal Spray Coatings for Wear Resistance of Hydel Components”, International Conference on Sintering Problems on Hydro Power Plants, New Delhi, 1999
	Debajyothi Sen, K. R. C. Somaraju, D. Srinivasa Rao and G. Sundararajan, “Influence of FEP Additions on the Properties of WC-Co Coatings Obtained by Detonation Spray Coating”, Proceedings of Surface Modifications Technologies SMT-XIII, (eds.) T S Sudarshan, K A Khor and M Jeandin, Singapore, p 71-81, 1999
	G D. Srinivasa Rao, Debajyothi Sen, K. R. C. Somaraju, S Ravi Kumar, N. Ravi and G. Sundararajan, “The Influence of Powder Particle Velocity and Temperature on the Properties of Cr3C2-25 NiCr Coating Obtained by Detonation–Gun”, Proceedings of the15th International Thermal Spray Conference, France, p 385-393, 1998
	G Dehm, C Secheu, M Bamberger and G. Sundararajan, “Microstructure of Laser-Induced Surface-Alloyed ?-Fe”, Proceedings of the Laser Materials Processing Conference ICALEO 97, USA, Vol. 83 (2), p F128-F137, 1997
	G. Sivakumar, L. Ramakrishna, V Jain, D. Srinivasa Rao, G. Sundararajan and G M Reddy, “The Influence of the Process Parameters on the Properties of Detonation Sprayed WC-12Co Coatings”, Proceedings of Thermal Spray 2001: New Surfaces for a New Millennium , (eds.) C C Berndt, K A Khor and E F Lugscheider, Singapore, p 1031-1038, 2001
	G. Sundararajan and L. Ramakrishna, “Mechanisms Underlying the Formation of Thick Alumina Coatings Through the MAO Coating Technology”, Surface & Coatings Technology, Vol.167, p 269-277, 2003
	G. Sundararajan and L. Ramakrishna, “Microarc Oxidation: A Novel Electrochemical Coating Technique”, Proceedings of the International Convention on Surface Engineering, INCOSURF-2004, p 9-11, 2004
	G. Sundararajan and Shrikant V. Joshi, “Surface Engineering: Emerging Trends”, Proceedings of International Conference on Advances in Surface Treatment : Research and Applications (ASTRA) , (eds.) T S Sudarshan, G. Sundararajan, G Totten and Shrikant V. Joshi, Hyderabad, India, p 1-11, 2004
	G. Sundararajan, “The Design of Materials and Coatings for Enhanced Tribological Performance”, Proceedings of International Symposium on Frontiers in Design of Materials, (eds.) B Raj, S Ranganathan, S L Mannan and S Bhanu, Chennai, India, p 339-357, 2006
	G. Sundararajan, “Thick Ceramic Coatings Based on Alumina–A Review”, Proceedings of Japan – India Ceramics Seminars, (eds.) T Okuda and F D Gnanam, Nagoya Institute of Technology, Japan, p 11-15, 2000
	G. Sundararajan, B Venkatraman, K Lakshminarayana and G B K Harish, "A Comparison of Tribological and Bulk Mechanical Properties of Boronized and Nitrided Steel", Proceedings of Surface Modification Technologies X, eds. T S Sudarshan, K A Khor and M Jeandin, Singapore, p 852-862, 1997
	G. Sundararajan, D. Srinivasa Rao, Debajyothi Sen and K. R. C. Somaraju, “Tribological Behaviour of Thermal Sprayed Coatings”, Proceedings of Surface Modification Technologies XI, (eds.) T S Sudarshan, K A Khor and M Jeandin, France, p 872-886, 1998
	G. Sundararajan, Debajyothi Sen and G. Sivakumar, “The Tribological Behaviour of Detonation Sprayed Coatings: The Importance of Coating Process Parameters”, Wear, Vol.258, p 377-391, 2005
	G. Sundararajan, G. Sivakumar and D. Srinivasa Rao, “The Interrelationship Between Particle Velocity and Temperature, Splat Formation and Deposition Efficiency in Detonation Sprayed Alumina Coatings”, Proceedings of Thermal Spray 2001: New Surfaces for a New Millennium , (eds.) CC Berndt, K A Khor and E F Lugscheider, Singapore, p 849-858, 2001
	G. Sundararajan, G. Sivakumar, R Kavitha and A R Phanikrishna, “Erosion Behaviour of Composite Cermet Coatings”, Proceedings of ACUN-5 Development in Composites: Advanced, Infrastructural, Natural and Nanocomposites, UNSW, Australia, p 568, 2006
	G. Sundararajan, K M U Prasad, D. Srinivasa Rao and Shrikant V. Joshi, “A Comparative Study of Tribological Behaviour of Plasma and D-Gun Sprayed Coatings under Different Wear Modes”, Journal of Materials Engineering and Performance, Vol. 7(3), p 343-351, 1998
	G. Sundararajan, K. R. C. Somaraju, and D. Srinivasa Rao, “The Prospects for the Development of High Performance Alumina Coatings using Detonation Gun Technique”, Proceedings of Surface Modification Technologies X, (eds.) T S Sudarshan, K A Khor and M Jeandin, Singapore, p 369-384, 1997
	G. Sundararajan, M Roy and D K Das, "Tribological Behaviour of Ion Deposited ZrN Coatings on Mild Steel Substrate", Proceedings of Surface Modification Technologies X, (eds.) T S Sudarshan, K A Khor and M Jeandin, Singapore, p 46-54, 1997
	George, P Bhargava, D. Srinivasa Rao and Shrikant V. Joshi, “Integrity of Detonation Sprayed CrxCy-NiCr Coatings Under Exposure to Thermal Cycling”, Advances in Applied Ceramics, Vol. 105(3), p 148-152, 2006
	I G Varshavskaya, V L Bukhovets, N. Ravi and G. Sundararajan, “Influence of Electrical Discharge Parameters of 200 kHz Frequency on Properties of DLC Films Obtained in Methane Atmosphere”, Material Sciences Transactions, Vol. 9(90), p 19-23, 2004 (Russian)
	J George, P Bhargava, D. Srinivasa Rao and Shrikant V. Joshi, “Integrity of Detonation Sprayed CrxCy-NiCr Coatings Under Exposure to Thermal Cycling”, Advances in Applied Ceramics, Vol. 105(3), p 148-152, 2006
	K A Khor, L G Yu and G. Sundararajan, “Formation of Hard Tungsten Boride Layer by Spark Plasma Sintering Boriding”, Thin Solid Films, Vol. 478, p 232-237, 2005
	K. R. C. Somaraju, D. Srinivasa Rao, G. Sivakumar, Debajyothi Sen, G. V. Narasimha Rao and G. Sundararajan, “The Influence of Powder Characteristics on the Properties of Detonation Sprayed Cr3C2-25NiCr Coatings”, Proceedings of 2nd International Thermal Spray Conference (ITSC), (eds.) CC Berndt , p 309-315, 2000
	K.R.C. Soma Raju, N.H. Faisal, D. Srinivasa Rao, S.V. Joshi and G. Sundararajan, “Electro-Spark Coatings for Enhanced Performance of Twist Drills” Surface & Coatings Technology, Vol. 202, p1636-1644, 2008
	L G Yu, K A Khor and G. Sundararajan, “Boride Layer Growth Kinetics during Boriding of Molybdenum by the Spark Plasma Sintering (SPS) Technology”, Surface & Coatings Technology, Vol. 201, p 2849-2853, 2006
	L G Yu, X J Chen, K A Khor and G. Sundararajan, “FeB / Fe2B Phase Transformation during SPS Pack Boriding: Boride Layer Growth Kinetics”, Acta Materialia, Vol. 53, p 2361-2368, 2005
	L. Rama Krishna, A. S. Purnima, N P. Wasekar and G. Sundararajan, “Kinetics and Properties of Micro Arc Oxidation Coatings Deposited on Commercial Al Alloys” Metallurgical & Materials Transactions, Vol. 38A, p 370-378, 2007
	L. Ramakrishna and G. Sundararajan, “Microarc Oxidation Technology: An Innovative Direction in the Field of Surface Engineering”, Proceedings of International Conference and Exhibition on Electroplating and Metal Finishing (Asia Interfinish-2002), New Delhi, p 42, 2002
	L. Ramakrishna and G. Sundararajan, “The Success Story of Micro Arc Oxidation Technology Developed at ARCI: A Technical Review”, National Seminar on Advances in Materials and Processing, Warangal, p 21, 2007
	L. Ramakrishna, A S Purnima and G. Sundararajan, “A Comparative Study of Tribological Behaviour of Microarc Oxidation and Hard Anodized Coatings”, Wear, Vol. 261, p 1095-1101, 2006
	L. Ramakrishna, A S Purnima, N P Wasekar and G. Sundararajan, “Kinetics and Properties of Micro Arc Oxidation Coatings Deposited on Commercial Al Alloys”, Metallurgical and Materials Transactions A, Vol. 38A, p 370-378, 2007
	L. Ramakrishna, Debajyothi Sen, D. Srinivasa Rao and G. Sundararajan, “Coatability and Characterization of Fly Ash Deposited on Mild Steel by Detonation Spraying”, Journal of Thermal Spray Technology, Vol. 12(1), p 77-79, 2003
	L. Ramakrishna, K. R. C. Somaraju and G. Sundararajan, “The Tribological Performance of Ultra-Hard Ceramic Composite Coatings Obtained through Microarc Oxidation”, Surface & Coatings Technology, Vol.163-164, p 484-490, 2003
	M Roy and G. Sundararajan, “The Reciprocating Wear of Detonation Sprayed WC-Co Coating on Mild Steel”, Proceedings of 12th International Colloquium of Tribology, Stuttgart / Ostfilderm, Germany, p 1971-1979, 2000
	M Roy, C V S Rao, D. Srinivasa Rao and G. Sundararajan, “Abrasive Wear Behaviour of Detonation Sprayed WC-Co Coatings on Mild Steel”, Surface Engineering, Vol. 15(2), p 129-136, 1999
	N. P. Wasekar, A. Jyothirmayi, L. Ramakrishna and G. Sundararajan, “Corrosion Behavior of MAO Coating on 6061 Alloy”, Journal of Materials Engineering and Performance (In press)
	N. P. Wasekar, L. Ramakrishna and G. Sundararajan, “The Electrochemical Corrosion Behaviour of MAO coated Al-6061 Alloy”, Journal of Materials Engineering and Performance (In press)
	N. Ravi, I.G. Varshavskaya, V.L. Bukhovets and G. Sundararajan, “Deposition of Diamond-Like Carbon Films on Aluminium Substrates by RF-RECVD Technique: Influence of Process Parameters”, Diamond and Related Materials, Vol.16, p 90-97, 2007
	N. Ravi, V L Bukhovets, I G Varshavskaya and G. Sundararajan, “Deposition of Diamond-like Carbon Films on Aluminium Substrates by RF- PECVD Technique : Influence of Process Parameters”, Diamond and Related Materials, Vol. 16, p 90-97, 2007
	P Saravanan, K. R. C. Somaraju, D. Srinivasa Rao, V Selvarajan, Shrikant V. Joshi and G. Sundararajan, “A Comparative Study of the Performance of Two Diverse Detonation Spray Systems”, Proceedings of Surface Modifications Technologies SMT-XIII, (eds.) T S Sudarshan, K A Khor and M Jeandin, Singapore, p 195-205, 1999
	P Saravanan, V Selvarajan, D. Srinivasa Rao, Shrikant V. Joshi and G. Sundararajan, “Influence of Process Variables on the Quality of Detonation Gun Sprayed Alumina Coatings”, Surface & Coatings Technology, Vol. 123, p 44-54, 2000
	P Saravanan, V Selvarajan, D. Srinivasa Rao, Shrikant V. Joshi and G. Sundararajan, “Application of Taguchi Method to the Optimization of Detonation Spraying Process”, Materials and Manufacturing Processes, Vol.15(1), p 139-153, 2000
	P Saravanan, V Selvarajan, M P Srivastava, Shrikant V. Joshi and G. Sundararajan, “Influence of Spraying Variables on Structure and Properties of Plasma Sprayed Alumina Coatings”, British Ceramic Transactions, Vol. 99(6), p 241-247, 2000
	P Saravanan, V Selvarajan, M P Srivastava, Shrikant V. Joshi and G. Sundararajan, “Optimizing Plasma Sprayed Alumina Coatings using Design of Experiments”, Advances in Applied Plasma Science, (eds.) A Kobayashi and N M Ghoniem, (ISAPS), Japan, Vol.2, p 189-196, 1999
	P. N. Krishna, S. G. S Raman, S. D. Pathak, R. Gnanamurthy, N. Ravi, “Fretting Wear Studies on DLC Coated Ti6Al4V”, Diamond & Related Materials (In press)
	P. S. Phani, V. Vishnukanthan, Shrikant V. Joshi and G. Sundararajan, “Modelling and Optical Diagnostic Study of Gas Particle Transport Phenomena in Cold Gas Dynamic Spraying”, Journal of Thermal Spray Technology (In Press)
	P. S. Phani, D.S.Rao, S.V. Joshi and G. Sundararajan, “Effect of Process Parameters and Heat Treatment on Properties of Cold Sprayed Copper Coatings”, Journal of Thermal Spray Technology, Vol. 16 (3), p 425-434, 2007
	P. S. Phani, V. Vishnukanthan and G. Sundararajan, “Effect of Heat Treatment on Properties of Cold Sprayed Nanocrystalline Copper Alumina Coatings”, Acta Materialia, Vol.55(14), p 4741-4751, 2007
	P. Suresh Babu, B. Basu and G. Sundararajan, “Influence of Oxy-Fuel Ratio on the Microstructure and Properties of Detonation Spray WC-12Co Coatings” Acta Materialia (in press)
	P. Suresh Babu, D.S. Rao, G.V.N. Rao and G.Sundararajan “Effect of Feedstock Size and its Distribution on the Properties of Detonation Sprayed Coatings”, Journal of Thermal Spray Technology, Vol. 16 (2), p 281-290, 2007
	P.S. Phani, V. Vishnukanthan and G. Sundararajan, “The Influence of Coating Process Parameters and Heat Treatment on the Properties of Cold Sprayed Cu-Al203 Coating”, Acta Materialia, Vol. 55, p 4741-4751, 2007
	R Kavitha and V Jayaram, “Deposition and Characterization of Alumina Films Produced by Combustion Flame Pyrolysis”, Surface & Coatings Technology, Vol. 201(6), p 2491-2499, 2006
	R Kavitha, S Meghani, and V Jayaram, “Synthesis of Titania Films by Combustion Flame Spray Pyrolysis Technique and its Characterization for Potocatalysis”, Materials Science and Engineering – B, Vol. 139(2-3), p 134-140, 2007
	S R Pulugurtha, DG Bhat, M H Gordon, J Shultz, M Staia, Shrikant V. Joshi and S Govindarajan, “Mechanical and Tribological Properties of Compositionally Graded CrAIN Films Deposited by AC Reactive Magnetron Sputtering”, Surface & Coatings Technology, Vol. 202 (4-7), p 1160-1166, 2007
	S. G. Sundara Raman, B. Rajasekaran, S.V. Joshi and G. Sundararajan, “Influence of Substrate Material on Plain Fatigue and Fretting Fatigue Behaviour of Detonation Gun Sprayed Cu-Ni-In Coatings” Journal of Thermal Spray Technology, Vol. 16 (4), p 571-579, 2007
	Shrikant V. Joshi, “Thermal Barrier Coatings for Advanced Gas Turbines: Some Materials Processing and Evaluation Related Issues”, Proceedings of International Corrosion Conference (CORCORN-97), India, p 163-175, 1997
	Shrikant V. Joshi, G. Sundararajan and T Bell, “Surface Engineering in India: On the Upswing”, Surface Engineering, Vol. 20(2), p 81-82, 2004
	T P Bagchi, B Sarma, D. Srinivasa Rao and Debajyothi Sen, “Detonation Coating Process of LP Turbine Blades-A Statistical Quality Control Approach”, Transactions of Powder Metallurgy Association of India, Vol. 23, 1996
	V Krishna, A Subrahmanyam and Shrikant V. Joshi, “Growth of Nanocrystalline Near Alpha Phase Tantalum Thin Films at Room Temperature Using Cylindrical Magnetron Cathode”, Surface & Coatings Technology, Vol. 202(14), p 3325-3331, 2008
	V Krishna, A Subrahmanyam, Shrikant V. Joshi, A R Phani, M Passacantando and S Santucci, “Studies on Phase Dependent Mechanical Properties of DC Magnetron Sputtered TaN Thin Films: Evaluation of Super Hardness in Orthorhombic Ta4N Phase”, Journal of Applied Physics D – Applied Physics, Vol. 41(4), Art No. 045409, 2008
	V L Bukhovets, I G Varshavskaya, and G. Sundararajan, “Deposition of Diamond-like Carbon Films on Aluminium Substrates by RF-PECVD Technique: Influence of Process Parameters”, Proceedings of National Workshop on Thin Film Techniques and Applications, (eds.) O N Bala Sundaram, V Veeravazhuthi, P Meena and T Selvan, Coimbatore, 2004
	V Yu Ulianitsky, A A Shtertser, S B Zlobni, D. Srinivasa Rao and G. Sundararajan, “Structure and Tribological Properties of Wear-Resistant Coatings made by Detonation Spraying”, Journal of Material Science (in Russian), (in press)
	Yu N Tolmachev, V L Bukhovets, I G Varshavskaya and N. Ravi, “Some Peculiarities of Microhardness Testing of Thin DLC Films Deposited on Soft Substrates”, Proceedings of 4th International Symposium on Diamond Films and Related Materials ISDF-4, Ukraine, p 207-208, 1999

Centre for Ceramic Processing

	A Yamuna, Roy Johnson, Y R Mahajan and M Lalithambika, “Kaolin-Based Cordierite for Pollution Control”, Journal of the European Ceramic Society, Vol. 24, p 65-73, 2004
	B V R Bhat, Y R Mahajan and Y V R K Prasad, “Effect of Volume Fraction of SiCp Reinforcement on the Processing Maps for 2124 Al Matrix Composites”, Metallurgical and Materials Transactions A, Vol. 31(3), p 629- 639, 2000
	Bhaskar Prasad Saha, Roy Johnson, I. Ganesh, G. V. Narasimha Rao, S Bhattacharjee and Y R Mahajan, “Thermal Anisotropy in Sintered Cordierite Monoliths”, Materials Chemistry and Physics, Vol. 67(1-3), p 140-145, 2001
	G. Sundararajan,U. S. Hareesh,Roy Johnson and Y R Mahajan, “Hidden Ceramics in Energy and Transport Sectors-Current Status and Road Map for the Future”, Proceedings of the 1st International Congress on Ceramics, (eds.)S Freiman, The American Ceramic Society, p 553-594, 2007
	P Rama Rao, M Doyama, G. Sundararajan, Y R Mahajan and K Oda (eds.), New Materials-Proceedings of Asia Academic Seminar, December 2001, Hyderabad, India, 2003
	Roy Johnson, Bhaskar Prasad Saha, I. Ganesh, V. Mahender, S Bhattacharjee, Y R Mahajan and M M K Khaja, “Ceramic Based Catalytic Convertors for Diesel Vehicles”, ( Sintering 2000) Transactions of the Indian Ceramic Society, Vol. 59(3) p 93-95, 200
	Roy Johnson, I. Ganesh, Bhaskar Prasad Saha, G. V. Narasimha Rao and Y R Mahajan, “Solid State Reactions of Cordierite Precursor Oxides and Effect of CaO Doping on the Thermal Expansion Behaviour of Cordierite Honeycomb Structures”, Journal of Materials Science, Vol. 38, p 2953-2961, 2003
	Roy Johnson, V Jain, I. Ganesh, Bhaskar Prasad Saha, Y R Mahajan and S V Kamat, “Studies on Energy Absorption Characteristics of Cordierite-Mullite Honeycombs”, Journal of Advanced Materials, Vol. 35(3), p 3-8, 2003
	S Chacko, Roy Johnson, Bhaskar Prasad Saha, I. Ganesh, M Vijaykumar and Y R Mahajan, “Rheometric Studies on Cordierite-Mullite Precursor Mix for Extrusion of Honeycomb Structures”, Transactions of the Indian Ceramic Society, Vol. 63(2), p 119-123, 2004
	T S Bartnitskaya, N F Ostrovskaya, G N Malearenko, Y R Mahajan, N. Thiyagarajan, K. Radha and S V Bhaskar, “Features of Carbothermal Synthesis of Aluminium Nitride under Nitrogen Pressure”, Powder Metallurgy and Metal Ceramics, Vol.41(5-6), p 232-236, 2002
	U.S. Hareesh and Roy Johnson “Rate Controlled Sintering: A Unique Concept for Microstructural Control”, A topical review in Transaction of the Indian Ceramic Society, Vol. 66(4), p 157-166, 2007
	V Jain, Roy Johnson, I. Ganesh, Bhaskar Prasad Saha and Y R Mahajan, “Effect of Rubber Encapsulation on the Comparative Mechanical Behaviour of Ceramic Honeycombs and Foams”, Materials Science and Engineering A, Vol. 347, p 109-122, 2003
	V K Varma, S V Kamat, Y R Mahajan and V V Kutumbarao, “Effect of Reinforcement Size on Low Strain Yielding Behaviour in Al-Cu-Mg/SiCp Composites”, Materials Science and Engineering A, Vol. 318, p 57-64, 2001
	V K Varma, S V Kamat, Y R Mahajan and V V Kutumbarao, “Strength Differential Effect in SiCp Reinforced Al Composites”, Zeitschrift fur Metallkunde, Vol. 93(9), p 910-912, 2002
	V V Bhanu Prasad, B V R Bhat, P Ramakrishnan and Y R Mahajan, “Clustering Probability Maps for Private Metal Matrix Composites”, Scripta Materialia, Vol.43, p 835-840, 2000
	V V Bhanu Prasad, B V R Bhat, Y R Mahajan and P Ramakrishnan, “Anisotropy in Structure and Properties of Extruded DRA Composites”, Journal of Materials Science. Letters, Vol. 21(13), p 1019-1021, 2002
	V V Bhanu Prasad, B V R Bhat, Y R Mahajan and P Ramakrishnan, “Structure-Property Correlation in Discontinuously Reinforced Aluminium Matrix Composites as a Function of Relative Particle Size Ratio”, Materials Science and Engineering A, Vol. 337, p 179-186, 2002
	V V Bhanu Prasad, B V R Bhat, Y R Mahajan, K. R. C. Somaraju and P Rama Krishnan, “Relative Particle Size Ratio and Important Factor in PM Composite”, Transactions of Powder Metallurgy Association of India, 2000
	V V Bhanuprasad, B V R Bhat, Y R Mahajan and P Ramakrishnan, “Effect of Extrusion Parameters on Structure and Properties of 2124 Aluminium Alloy Matrix Composites”, Materials and Manufacturing Processes, Vol. 16(6), p 841-853, 2001
	Y R Mahajan and Roy Johnson, “Ceramic Cellular Solids: Unique Materials for Engineering Applications”, A chapter in Materials Research; Current Scenario and Future Projections, (eds.) R Chidambaram, MRSI, p 319-336, 2003

Centre for Laser Processing of Materials

	A Basu, J Chakraborty, S. M. Shariff, G. Padmanabham, Shrikant V. Joshi, G. Sundararajan, J D Majumdar and I Manna, “Laser Surface Hardening of Austempered (Bainitic) Ball Bearing Steel”, Scripta Materialia, Vol. 56, p 887-890, 2007
	B. Shanmugarajan and G. Padmanabham “Laser Welding Investigations on Ti-SS Dissimilar Material Combination” Proceedings of IWC- 2008, Chennai, p153-156, 2008
	C Padmavathi, J. K. Sarin Sundar, Shrikant V. Joshi and K P Rao, “Effect of Pulsed Nd-YAG Laser Melting Treatment on Microstructural and Corrosion Behaviour of AZ91C Mg Alloy”, Materials Science and Technology, Vol. 22(5), p 583-589, 2006
	C Padmavathi, J. K. Sarin Sundar, Shrikant V. Joshi and K P Rao, “Improving Wear Resistance of Cast AZ91C Magnesium Alloy by Surface Melting Techniques”, Transactions of Indian Institute of Metals, Vol. 59(1), p 99-106, 2006
	C Padmavathi, K P Rao, J. K. Sarin Sundar and Shrikant V. Joshi , “Characterization of Pulsed Nd:YAG Laser Surface Melted Cast AZ91C Magnesium Alloy”, Proceedings of International Welding Symposium on Emerging Trends in Welding 2005, Indian Welding Society, Hyderabad, p 1-5, 2005
	G D Janaki Ram, A V Reddy, K P Rao, G M Reddy and J. K. Sarin Sundar, “Microstructure and Tensile Properties of Inconel 718 Pulsed Nd-YAG Laser Welds”, Journal of Materials Processing Technology, Vol. 167, p 73-82, 2005
	G Thawari, G. Sundararajan and Shrikant V. Joshi, “Laser Surface Alloying of Medium Carbon Steel with SiC(p)”, Thin Solid Films, Vol. 423, p 41-53, 2003
	G Thawari, J. K. Sarin Sundar, G. Sundararajan and Shrikant V. Joshi, “Influence of Process Parameters during Pulsed Nd:YAG Laser Cutting of Nickel-Base Superalloys”, Journal of Materials Processing Technology, Vol. 170, p 229-239, 2005
	G. Padmanabham, M Schaper, S Pandey and E Simmchen, “Tensile and Fracture Behaviour of Pulsed Gas Metal Arc- Welded Al-Cu-Li”, Supplement of the Welding Journal, Vol. 86, p 147-160-s, 2007
	G. Padmanabham, S Pandey and M Schaper, “Pulsed Gas Metal Arc Welding of Al-Cu-Li Alloy”, Science and Technology of Welding and Joining, Vol.10(1), p 67-75, 2005
	G. Padmanabham, S Pandey, M Schaper, “Structure and Mechanical Properties of Pulsed-GMA Welded Al-Li Alloy”, Proceedings 7th International Conference: Trends in Welding Research, USA, p 929-934, 2005
	G. Sundararajan and Shrikant V. Joshi, “Expanding Horizons of High Power Laser Applications in Advanced Manufacturing”, Proceedings of DAE-BRNS Symposium on Applications of Plasmas, Lasers and Electron Beams in Advanced Materials Processing (Power Beams & Materials Processing PBAMP- 2002), (eds.) A K Das, A V Bapat and A K Sinha, p 40-51, 2002
	J Alam, R Bathe, R D Vispute, J M Zavada, C A Litton, A A Lliadis and S N Mohammad, “Effect of Dislocations on Luminescence Properties of Silicon-Doped GaN Grown by Metalorganic Chemical Vapor Deposition Method”, Journal Vacuum Science and Technology B, Vol. 22(2), p 624-629, 2004
	J K Sarin Sunder and Shrikant V. Joshi, “Lasers: Waiting to Make Their Mark”, Journal of Materials Processing, p 40-44, 1999
	J. K. Sarin Sundar and Shrikant V. Joshi, “Laser Cutting of Materials”, KIRAN, Journal of Indian Laser Association, p 18-24, 2002
	J. K. Sarin Sundar, G. Padmanabham and S.V. Joshi “Laser Cutting and Welding Technologies for Strategic Applications” Proceedings of Seminar on Missile Systems and Technologies (MAST-2007), Hyderabad, p 157-164, 2007
	J. K. Sarin Sundar, G. Padmanabham, R. N. Gupta and R. Reddy “Investigations on Laser Welidng Feasibility for Fabrication of Ti6Al4V Structures for Aerospace Applications SAME” Proceedings of National Aerospace Manufacturing Seminar (NAMS-2007), Thiruvananthapuram, p 06, 2007
	J. K. Sarin Sundar, Shrikant V. Joshi and G. Sundararajan, “Traditional and Non-traditional Materials Processing Possibilities with High Power Industrial Lasers”, Proceedings of WALMI, Jadavpur, India, 2004
	M S Sahasrabudhe, S I Patil, S K Date, K P Adhi, S D Kulkarni, P A Joy and Ravi Nathuram Bathe, “Influence of Magnetic (Fe+3)and Non-Magentic (Ga+3) Ion Doping at Mn-Site on the Transport and Magnetic Properties of La0.7Ca0.3MnO3”, Solid State Communications, Vol. 137, p 595-600, 2006
	P. K. Jain, V Jain, M Sudhakar, A G Bhavani and G. Sundararajan, “Effect of Reinforcement and Process Parameters on the Performance of Graphite Gasket Sheet”, Proceedings of International Workshop on Carbon Materials for Energy Applications, p 289-297, 2004
	R J Choudhary, A S Ogale, S R Shinde, S Hullavarad, S B Ogale, T Venkatesan, Ravi Nathuram Bathe, S I Patil and R Kumar, “Evaluation of Maganite Films on Silicon for Uncooled Bolometric Applications”, Applied Physics Letters, Vol. 84(19), p 3846-3848, 2004
	R S Dalvi, S. M. Shariff, Shrikant V. Joshi and R Raman, “Comparison of Localized Corrosion Resistance of Fusion Zone in 2205 Type DSS Autogenous Welds Produced by CO2 Laser and TIG Welding Processes”, Proceedings of Stainless Steel World Conference 2005, Maastricht, The Netherlands, p 5072-st, 2005
	R. C. Shivamurthy, M. Kamaraj, R. Nagarajan, S. M. Shariff and G. Padmanabham “Effect of Impingement Angle on Slurry Erosion Rates of Laser Surface Alloyed Steels” Proceedings of IIW-IC-2008, Chennai, p 334-349, 2008
	S A Mirji, Y B Khollam, S B Deshpande, H S Potdar, Ravi Nathuram Bathe, S R Sainkar and S K Date, “Microwave–Hydrothermal Accelerated Solid State Reaction Route for the Synthesis of La0.5Ba0.5MnO3”, Materials Letters, Vol. 58, p 837-841, 2004
	S B Ogale, Ravi Nathuram Bathe, R J Choudhary, S N Kale, A B Ogale, A G Banpurkar and A V Limaye, “Boundary Effects on the Stability of Thin Submerged Granular Piles”, Physica-A-354, p 49-58, 2005
	S Bandyopadhyay, H Gokhale, J. K. Sarin Sundar, G. Sundararajan and Shrikant V. Joshi, “A Statistical Approach to Determine Process Parameter Impact in Nd:YAG Laser Drilling of IN718 and Ti-6Al-4V Sheets”, Optics and Lasers in Engineering, Vol. 43, p 163-182, 2005
	S Bandyopadhyay, J. K. Sarin Sundar, G. Sundararajan and Shrikant V. Joshi, “ Geometrical Features and Metallurgical Characteristics of Nd: YAG Laser Drilled Holes in Thick IN718 and Ti-6Al-4V Sheets”, Journal of Materials Processing Technology, Vol. 127, p 83-95, 2002
	S Dingal, T R Pradhan, S Sundar, A Roy Choudhury and S K Roy, “Application of Taguchi Methods in the Experimental Investigation of the Laser Sintering Process”, Materials Science Engineering A , (in press)
	S I Patil, M S Sahasrabudhe, S N Sadakale, P R Sagdeo, Ravi Nathuram Bathe, K P Adhi, S K Date and S M Bhagat, “Phase Separation Scenario in Ba Doped LaMnO3”, Phyisca Status Solidi C1, Vol.12, p 3623-3627, 2004
	S M Jejurikar, A G Banpurkar, A V Limaye, S K Date, S I Patil, K P Adhi, P Misra, L M Kukreja and Ravi Bathe, “Structural, Morphological and Electrical Characterization of Heteroepitaxial ZnO Thin Films Deposited on Si (100) by Pulsed Laser Deposition: Effect of Annealing (800oC) in Air”, Journal of Applied Physics, Vol. 99, 014907(1-7), 2006
	S S Reddy, J. K. Sarin Sunder, B Venkataraman and Shrikant V. Joshi, “Evaluation of Microstructural and Dry Sliding Wear Characteristics of Pulsed Nd:YAG Laser Surface Melted Al-Si Alloys”, Proceedings of International Conference on Advances in Surface Treatment: Research & Applications (SMT XVII & IFHTSE), (eds.) T S Sudarshan, G. Sundararajan, G Totten and Shrikant V. Joshi, Hyderabad, India, p 176, 2003
	S S Reddy, S. M. Shariff, B Venkataraman and Shrikant V. Joshi, “ IA-12: Solid Particle Erosion Behaviour of Laser Surface Modified Al-12 Si Alloy”, Proceedings of INCOSURF-2004, p 333-340, 2004
	S S Reddy, S. M. Shariff, B Venkataraman and Shrikant V. Joshi, “Enhancement of Wear Resistance of Al-Si Alloys by Laser Surface Engineering”, Proceedings of International Conference on Advances in Surface Treatment: Research and Applications (ASTRA),( eds.) T S Sudarshan, G. Sundararajan, G Totten and Shrikant V. Joshi, Hyderabad, India, p 255-264, 2004
	S. M. Shariff, G. Sundararajan and Shrikant V. Joshi, “Parametric Impact on the Microstructure and Wear Behaviour of Laser Surface Alloyed Iron Boride Layers”, Proceedings of Surface Modifications Technologies SMT-XIII, (eds.) T S Sudarshan, K A Khor and M Jeandin, Singapore, p 135-144, 1999
	S. M. Shariff, G. Sundararajan and Shrikant V. Joshi, “Parametric Influence on Cut Quality Attributes and Generation of Processing Maps for Laser Cutting”, Journal of Laser Applications, Vol.11(2), p 54-63, 1999
	S. M. Shariff, V Jain, G. Sundararajan and Shrikant V. Joshi, “Influence of Laser Glazing on Properties of Diffusion Borided Layers”, Proceedings of International Conference on Applications of Laser and Electro-optics (ICALEO-2003), USA, p 1506, 2003
	S. M. Shariff, V Jain, G. Sundararajan and Shrikant V. Joshi, “Property Enhancement of Diffusion Borided Layers by Laser Treatment”, Journal of Laser Applications, Vol. 17(2), p 100-110, 2005
	S. Nirmala, Ravi Nathuram Bathe and A. S. Joshi “Detection of Breakthrough in Laser Percussion Drilling Process” Lasers in Engineering, Vol. 17, p 361-369, 2007
	Shrikant V. Joshi and G. Sundararajan, “Lasers for Metallic and Intermetallic Coatings”, Chapter 4, SAM Surface Engineering Series, Vol. 1, p 121-175, 1999
	Shrikant V. Joshi and J. K. Sarin Sundar, “Materials Processing Possibilities with High Power Lasers”, Proceedings of National Workshop on High Power Lasers and Directed Energy Applications, New Delhi, p 71, 2002
	Shrikant V. Joshi, “High Performance Thermal Barrier Coatings and Relevance of Power Beams in their Development”, Proceedings of DAE-BRNS Symposium on Applications of Plasmas, Lasers and Electron Beams in Advanced Materials Processing (Power Beams & Materials Processing PBAMP- 2002), (eds.) A K Das, A V Bapat and A K Sinha, p 105-117, 2002
	Shrikant V. Joshi, G Thawari, L S Kumar, Debajyothi Sen and G. Sundararajan, “Influence of Laser Glazing on the Characteristics and Tribological Performance of Plasma and Detonation Sprayed WC-Co Coatings”, Proceedings of Thermal Spray 2001: New Surfaces for a New Millennium , (eds.) C C Berndt, K A Khor and E F Lugscheider, Singapore, p 583-591, 2001
	T Manisekaran, M Kamaraj, S M Sharrif and Shrikant V. Joshi, "Slurry Erosion Studies on Surface Modified 13Cr-4Ni Steels: Effects of Angle of Impingement and Particle Size", Journal of Materials Engineering and Performance, Vol. 16(5), p 567-572, 2007

Centre for Non-Oxide Ceramics

	B M Reddy and I. Ganesh, “Characterization of La2O3-TiO2 and V2O5 / La2O3-TiO2 Catalysts and their Activity for Synthesis of 2,6- Dimethylphenol”, Journal of Molecular Catalysis A Chemical, Vol. 169, p 207-223, 2001
	B M Reddy and I. Ganesh, “Vapour Phase Synthesis of Quinoline from Aniline and Glycerol over Mixed Oxide Catalysts”, Journal of Molecular Catalysis A: Chemical, Vol.151, p 289-293, 2000
	B M Reddy, G M Kumar, I. Ganesh and A Khan, “Vapour Phase Hydrogenation of Cinnamaldehyde over Silica Supported Transition Metal-Based Bimetallic Catalysts”, Journal of Molecular Catalysis A: Chemical, Vol. 247(1-2), p 80-87, 2006
	B M Reddy, I. Ganesh and A Khan, “Preparation and Characterization of In2O3-TiO2 and V2O5/In2O3-TiO2 Composite Oxides for Catalytic Applications”, Applied Catalysis A General, Vol. 248, p 169-180, 2003
	B M Reddy, I. Ganesh and A Khan, “Stabilization of Nanosized Titania-Anatase for High Temperature Catalytic Applications”, Journal of Molecular Catalysis A: Chemical, Vol. 223(1-2), p 295-304, 2004
	B M Reddy, I. Ganesh, E P Reddy, A Fernandaz and P G Smirniotis, “Surface Characterization of Ga2O3-TiO2 and V2O5 / Ga2O3-TiO2 Catalysts”, Journal of Physical Chemistry B, Vol. 105, p 6227-6235, 2001
	B.M. Reddy, G.K. Reddy, A. Khan and I. Ganesh “Synthesis of Mono-phasic Ce0.5Zr0.5O2 Solid Solution by Microwave-Induced Combustion Method”, Journal of Materials Science , Vol. 42 (10), p 3557-3563, 2007
	B.M. Reddy, G.K. Reddy, K. N. Rao, A. Khan and I. Ganesh “Silica Supported Transition Metal-based Bimetallic Catalysts for Vapour Phase Selective Hydrogenation of Furfuraldehyde”, Journal of Molecular Catalysis A : Chemical Vol. 265 (1-2), p 276-282, 2007
	I. Ganesh “Near Net-shape ?-Si4Al2O2N6 Parts by Hydrolysis Induced Aqueous Gelcasting Process”, International Journal of the Applied Ceramic Technology, DOI:10.1111/j.1744-7402.2008.02258.x
	I. Ganesh “Surface Oxidation and Dispersion Behaviour of Phenolic Resin Coated ??SiC Powder in the Aqueous Medium ”, Advances in Applied Ceramics, DOI: 10.1179/174367608X263368
	I. Ganesh and J.M.F. Ferreira “Influence of Phase Composition on Sintered Microstructure of Combustion Synthesized Oxides”, Research Letters in Materials Science, Article Id. 91376, p 1-5, 2007
	I. Ganesh and J.M.F. Ferreira “Influence of Raw Material Type and of the Overall Chemical Composition on Phase Formation and Sintered Microstructure of Mullite Aggregates”, Ceramics International (In press)
	I. Ganesh and J.M.F. Ferreira “Synthesis and Characterization of MgAl2O4- ZrO2Composites”, Ceramics International, doi : 10.1016/j.ceramint.2007.10.006(2008)
	I. Ganesh, S Bhattacharjee, Bhaskar Prasad Saha, Roy Johnson, K Rajeshwari, R SenGupta, M V R Rao and Y R Mahajan, “An Efficient MgAl2O4 Spinel Additive for Improved Slag Erosion and Penetration Resistance of High Al2O3 and MgO-C Refractories”, Ceramics International, Vol. 28, p 245-253, 2002
	I. Ganesh, “Microwave Combustion and Solid State Reaction Synthesis of MgAl2O4 Powders”, 8th International Conference on Ceramic Processing and Science, Germany, 2002
	I. Ganesh, B Srinivas, Roy Johnson, Bhaskar Prasad Saha and Y R Mahajan, “Effect of Fuel type on Morphology and Reactivity of Combustion Synthesized MgAl2O4 Powders”, British Ceramic Transactions, Vol. 101 (6), p 247-254, 2002
	I. Ganesh, B Srinivas, Roy Johnson, Bhaskar Prasad Saha and Y R Mahajan, “Microwave Assisted Solid-State Reaction Synthesis of MgAl2O4 Spinel Powders”, Journal of the European Ceramic Society, Vol. 24, p 201-207, 2004
	I. Ganesh, B Srinivas, Roy Johnson, G. V. Narasimha Rao and Y R Mahajan, “Effect of Preparation Method on Sinterability and Properties of Nanocrystalline MgAl2O4 and ZrO2-MgAl2O4 Materials”, British Ceramic Transactions, Vol.102(3), p 119-128, 2003
	I. Ganesh, Bhaskar Prasad Saha, Roy Johnson, S Bhattacharjee, Y R Mahajan and K Rajeshwari, “Effects of Compositional Variation and Additives on Sintering of MgAl2O4 Spinel”, Proceedings of 63rd Annual Session of Indian Ceramic Society, p 26, 2000
	I. Ganesh, Dulal Chandra Jana, S Shaik and N. Thiyagarajan, “An Aqueous Gelcasting Process for Sintered Silicon Carbide Ceramics”, Journal of the American Ceramic Society, Vol. 89(10), p 3056-3064, 2006
	I. Ganesh, G. Sundararajan and J.M.F. Ferreira “Formation and Densification Behavior of Mullite Aggregates from Beach Sand Sillimanite”, Journal of the American Ceramic Society, DOI: 10.1111/j.1551-2916.2008.02474.x
	I. Ganesh, K A Teja, N. Thiyagarajan, Roy Johnson and B M Reddy, “Formation and Densification Behavior of Magnesium Aluminate Spinel: The influence of CaO and Moisture in the Precursors”, Journal of the American Ceramic Society, Vol. 88(10), p 2752-2761, 2005
	I. Ganesh, N. Thiyagarajan, D. C. Jana, P. Barik, J.M.F. Ferreira and G. Sundararajan “Dense ??SiAlONs Consolidated by a Modified Hydrolysis Assisted Solidification Route” Journal of the European Ceramic Society, Vol. 28 (4), p 879-885, 2008
	I. Ganesh, N. Thiyagarajan, Dulal Chandra Jana, G. Sundararajan, S.M. Olhero and J.M.F. Ferreira “Influence of Processing Route and SiO2 on Sintering Ability, CTE and Dielectric Constant of ??Si4Al2O2N6”, Journal of Materials Research (In press)
	I. Ganesh, N. Thiyagarajan, Dulal Chandra Jana, Prasenjit Barick and G. Sundararajan “An Aqueous Gelcasting Route to Dense ??Si4Al2O2N6 -0.5 SiO2 Ceramics” Journal of American Ceramic Society, Vo. 91(5), p 1566-1571, 2008
	I. Ganesh, N. Thiyagarajan, Dulal Chandra Jana, Y.R. Mahajan and G. Sundararajan “An Aqueous Gelcasting Process for ??Si4Al2O2N6 Ceramics” Journal of American Ceramic Society (In press)
	I. Ganesh, N. Thiyagarajan, Dulal Chandra Jana, Y.R. Mahajan and G. Sundararajan “Influence of Chemical Composition and Y2O3 on Sinterability, Dielectric Constant and CTE of ?-SiAlON” Journal of American Ceramic Society, Vol. 91 (1), p 115-120, 2008
	I. Ganesh, N. Thiyagarajan, G. Sundararajan, S. M. Olhero and J.M.F. Ferreira “A Non-Aqueous Processing Route for Phosphate-Protection of AlN Powder against Hydrolysis” Journal of the European Ceramic Society , Vol. 28(11), p 2281-2288 , 2008
	I. Ganesh, P.M.C. Torres and J.M.F. Ferreira “Densification Behaviour of Combustion Derived Al2O3 Powders”, Ceramics International (In press)
	I. Ganesh, Roy Johnson, G. V. Narasimha Rao and Y R Mahajan, S S Madavendra and B M Reddy, “Microwave-Assisted Combustion Synthesis of Nanocrystalline MgAl2O4 Spinel Powder”, Ceramics International, Vol. 31, p 67-74, 2005
	I. Ganesh, Roy Johnson, Y R Mahajan, A Khan, S S Madhavendra and B M Reddy, “Microwave-Induced Combustion Synthesis of Nanocrystalline TiO2-SiO2 Binary Oxide Material”, Journal of Materials Research, Vol. 19(4), p 1015-1023, 2004
	I. Ganesh, S Bhattacharjee, Bhaskar Prasad Saha, Roy Johnson and Y R Mahajan, “A New Sintering Aid for Magnesium Aluminate Spinel”, Ceramics International, Vol.27, p 773-779, 2001
	I. Ganesh, S. M. Olhero and J.M.F. Ferreira “Phosphoric Acid Treated AlN Powder for Aqueous Processing of Net-shape Dense AlN and ??SiAlON Parts”, Advances in Applied Ceramics (In press)
	I. Ganesh, S. M. Olhero, A. A. Branca, M. R. Correia, G.Sundararajan and J.M.F. Ferreira “Chemisorption of Phosphoric Acid and Surface Characterization of As-Passivated AlN Powder against Hydrolysis”, Langmuir, Vol. 24 (10), p 5359-5365, 2008
	I. Ganesh, S. M. Olhero, A.H. Rebelo and J.M.F. Ferreira “Formation and Densification Behaviour of MgAl2O4 Spinel : The Influence of Processing Parameters”, Journal of the American Ceramic Society, Vol 91 (6), p 1905–1911, 2008
	I. Ganesh, S. Olhero, P. Torres, G. Sundararajan and J.M.F. Ferreira, “Near-Net Shaping of MgAl2O4 Spinel Ceramics”, Journal of the American Ceramic Society (In press)
	N. Thiyagarajan, Roy Johnson, Bhaskar Prasad Saha, Y. Srinivasa Rao, S Kumar, I. Ganesh and Y R Mahajan, “Glimpses of Ceramics-ARCIs Perspectives”, Proceedings of US-Japan Workshop (2002)”, Osaka, Japan, p 49-57, 2002
	S. M. Olhero, I. Ganesh, P.M.C. Torres, and J.M.F. Ferreira “Surface Passivation of MgAl2O4 Spinel Powder by Chemisorbing H3PO4 for an Easy Aqueous Processing” Langmuir, (In Press)
	S. M. Olhero, I. Ganesh, P.M.C. Torres, F. J. Alves, and J.M.F. Ferreira “An aqueous colloidal processing of ZTA composites” Journal of American Ceramic Society (In Press)
	V V Bhanuprasad, B V R Bhat, Y R Mahajan and N. Thiyagarajan, “Effect of Particle Size on Processing and Properties of RBSC”, Transactions of Powder Metallurgy Association of India, 2001

Centre for Fuel Cell Technology

	A L M Reddy, N Rajalakshmi and S Ramaprabhu, "Cobalt-Polypyrrole-Multiwalled Carbon Nanotube Catalysts for Hydrogen and Alcohol Fuel Cells", Carbon, Vol. 41(1), p 2-11, 2008
	G Velayutham, J Koushik and K. S. Dhathathreyan, “Influence of Gas Diffusion Substrates (GDS) on the Performance of PEM Fuel Cell”, Proceedings of DAE-BRNS International Symposium on Materials Chemistry, Mumbai, p 315, 2006
	G. Velayutham, J. Kaushik, N. Rajalakshmi and K.S. Dhathathreyan “Effect of PTFE Content in Gas Diffusion Media and Microlayer on the Performance of PEMFC Tested under Ambient Pressure”, Fuel Cells, Vol. 7(4), p 314-318, 2007
	K Jayakumar, S Pandiyan, N Rajalakshmi and K. S. Dhathathreyan, “Cost Benefit Analysis of Commercial Bipolar Plates for PEMFCs”, Journal of Power Sources, Vol. 161(1), p 454-459, 2006
	K Ramya, G Velayutham, C K Subramaniam, N Rajalakshmi and K. S. Dhathathreyan, “Effect of Solvents on the Characteristics of Nafion ®/ PTFE Composite Membranes for Fuel Cell Applications”, Journal of Power Sources, Vol.160, p 10-17, 2006
	K. Ramya and K.S. Dhathathreyan “Methanol Crossover Studies on Heat Treated Nafion? Membranes”, Journal of Membrane Science, Vol. 311(1-2), p 121-127, 2008
	K. S. Dhathathreyan and N Rajalakshmi, “Polymer Electrolyte Membrane Fuel Cell”, A chapter in Recent Trends in Fuel Cell Science and Technology, (eds.) S Basu, 2006
	M K Kumar, N Rajalakshmi and S Ramaprabhu, "Electrochromism in Mischmetal-based AB(2) Alloy Hybrid Thin Film", Journal of Physical Chemistry – C, Vol. 111(24), p 8532-8537, 2007
	M M Shaijumon, N Rajalakshmi, H Ryu and S Ramaprabhu, “Synthesis of Multi-Walled Carbon Nanotubes in High Yield using Mm Based AB2 Alloy Hydride Catalysts and the Effect of Purification on their Hydrogen Absorption Properties”, Nanotechnology, Vol. 16, p 518-524, 2005
	M M Shaijumon, S Ramaprabhu and N Rajalakshmi, “Platinum/ Multiwalled Carbon Nanotubes-Platinum/Carbon Composites as Electrocatalysts for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cell”, Applied Physics Letters, Vol. 88, p 253105(1-3), 2006
	N Jha, A L M Reddy, M M Shaijumon, N Rajalakshmi and S Ramaprabhu, "Pt-Ru/Multi-walled Carbon Nanotubes as Electrocatalysts for Direct Methanol Fuel Cell", International Journal of Hydrogen Energy, Vol. 33, p 427-433, 2008
	N Lakshmi, N Rajalakshmi and K S Dhathathreyan, “Functionalization of Various Carbons for Proton Exchange Membrane Fuel Cell Electrodes: Analysis and Characterization”, Journal of Physics D: Applied Physics, Vol. 39, p 2785-2790, 2006
	N Rajalakshmi, H Ryu, M M Shaijumon and S Ramaprabhu, “Performance of Polymer Electrolyte Membrane Fuel Cells with Carbon Nanotubes as Oxygen Reduction Catalyst Support Material”, Journal of Power Sources, Vol.140, p 250-257, 2005
	N Rajyalakshmi, H Ryu and K. S. Dhathathreyan, “Platinum Catalyzed Membranes for Proton Exchange Membrane Fuel Cells-Higher Performance”, Chemical Engineering Journal, Vol. 102(3), p 241-247, 2004
	N. Rajalakshmi and K.S. Dhathathreyan “Catalyst Layer in PEMFC Electrodes-Fabrication, Characterization and Analysis”, Chemical Engineering Journal Vol.129 p 31-40, 2007
	N. Rajalakshmi, S. Pandiyan and K.S. Dhathathreyan “Design and Development of Modular Fuel Cell Stacks for various Applications”, International Journal of Hydrogen Energy, Vol. 33, p 449-454, 2008
	S Pandiyan, K Jayakumar, N Rajalakshmi and K S Dathathreyan, “Thermal and Electrical Energy Management in a PEMFC Stack – An Analytical Approach”, International Journal of Heat and Mass Transfer, Vol. 51(3-4), p 469-473, 2008

Centre for Carbon Materials

	A V Okotrub, P. K. Jain, N F Yudanov, A I Romanenko and Ph A Pruss, “Development of Composite Polymeric Films Containing Carbon Nanotubes”, International Workshop on Fullerenes and its Atomic Clusters (AWFAC- 2001), St. Petersburg, Russia, p 121, 2001
	K. V. P. Prabhakar, P. K. Jain and R. Sundaresan, “Effect of Partial Gas Pressure on Synthesis of Carbon Nanotubes”, Proceedings of Indo-Carbon 2006 Conference, Bhopal, p 140-144, 2006
	P. K. Jain and G. Sundararajan, “Carbon Nanotubes – A Wonderful Material” Tarang- Journal of DST, India p 13-21, 2004
	P. K. Jain, “Coal to Carbon Nanotubes”, Proceedings of Science for Society, IICT Hyderabad, p 5, 2007
	P. K. Jain, “Oil Spill Management from Exfoliated Graphite”, TARANG-Journal of DST, India, p 85-91, 2005
	P. K. Jain, G. Sundararajan and M Subramaniam, “Automobile Gaskets from Expanded Graphite”, Proceedings of National Conference on Carbon-99, New Delhi, p 257, 1999
	P. K. Jain, G. Sundararajan, Y R Mahajan, A V Okotrub, N F Yudanov and A I Romaneko, “Development of Carbon Nanotubes and Polymer Composites Therefrom”, Proceedings of National Conference on Carbon 2001, Gujarat, p 249-255, 2001
	P. K. Jain, K. V. P. Prabhakar and R. Sundaresan, “Synthesis of Carbon Nanotubes in Arc Discharge Process”, Proceedings of Indo-Carbon 2006 Conference, Bhopal, p 121, 2006
	P. K. Jain, K. V. P. Prabhakar and R. Sundaresan, “High Temperature Synthesis of Carbon Nanotubes in ARC-Discharge Process”, Proceedings of 5th ISAMPE National Conference on Composites INCCOM-5: Challenges in Composites, p 612-617, 2006
	P. K. Jain, V Jain, M Sudhakar, A G Bhavani and G. Sundararajan, “Effect of Reinforcement and Process Parameters on the Performance of Graphite Gasket Sheet”, Proceedings of International Workshop on Carbon Materials for Energy Applications, p 289-297, 2004
	P. K. Jain, Y R Mahajan, G. Sundararajan, A V Okotrub, A I Romaneneko and N F Yudanov, “Synthesis of Multi-Wall Carbon Nanotubes Based Polymer Composite”, 13th Annual General Meeting of MRSI , p J20, 2002
	P. K. Jain, Y R Mahajan, G. Sundararajan, A V Okotrub, N F Yudanov and A I Romanenko, “Development of Carbon Nanotubes and Polymer Composites Therefrom ”, Carbon Science, Vol. 3(3), p 142-145, 2002

Centre for Sol-Gel Coatings

	D. Ganguli, R. Subasri, R. Varadharajan, “Inorganic Dispersed-phase Composites by Sol-Gel Processing: An Update ”, Special Issue of Key Engineering Materials (In press)
	H Näfe and R Subasri, “Indication of Bivariance in the Phase System Sodium Zirconate / Zirconia”, Journal of Chemical Thermodynamics, Vol 39, p 972-977, 2007
	H Näfe and R Subasri, “Revision of the Data on the Standard Gibbs Free Energy of Formation of Sodium Zirconate”, Journal of Chemical Thermodynamics, Vol 39, p 22-27, 2007
	R Subasri, S Roy, D Matusch, H Näfe and F Aldigner, “Synthesis and Structural Characterization of a Metastable Mullite-like Alumina Phase”, Journal of American Ceramic Society, Vol. 88(7), p 1740-1746, 2005
	R. Subasri and H Nafe, "Texture in Na-?-Al2O3 due to Microwave Processing", Materials Chemistry and Physics, (in press)
	R. Subasri, H. Näfe, “Phase Evolution on Heat Treatment of Sodium Silicate Water Glass”, Journal of Non-Crystalline Solids”, Vol. 354, p 896-900, 2008
	R. Varadharajan, L.C. Klein “Sol-Gel Synthesis of Erbium-Doped Yttrium Silicate Glass-Ceramics”, Journal of Non-Crystalline Solids, (doi:10.1016/j.jnoncrysol.2008.03.033)

Centre for Structural and Chemical Characterization

	B Venkataraman and G. Sundararajan, “The Influence of Sample Geometry on the Friction Behaviour of Carbon-Carbon Composites”, Acta Materialia, Vol. 50, p 1153-1163, 2002
	B Venkataraman, A K Mukhopadhyay and G. Sundararajan, “The Evaluation of the Inherent Resistance to Ballistic Penetration of High Strength Aluminium Alloys using a High Velocity Gas Gun”, Proceedings of the 16th International Ballistic Symposium, Ballistics-1996, U.S.A, Vol. 3, p 339-348,1996
	B Venkatraman and G. Sundararajan, “Correlation Between the Characteristics of the Mechanically Mixed Layer and Wear Behaviour of Aluminium, Al-7075 Alloy and Al-MMCs”, Wear, Vol. 245, p 22-38, 2000
	C M Reddy, G. Ravichandra, S Basavoju, M T Kirchner, K A Padmanabhan and G R Desiraju, “Structural Basis for Bending of Organic Crystals”, Chemical Communications, p 3945-3947, 2005
	C M Reddy, M T Kirchner, G. Ravichandra, K A Padmanabhan and G R Desiraju, “Isostructurality, Polymorphism and Mechanical Properties of some Hexahalogenated Benzenes: The Nature of Halogen…Halogen Interactions”, Chemistry : A European Journal, Vol. 12, p 2222-2234, 2006
	G. Sundararajan and D A Rigney (eds.), Proceedings of International Symposium on a Genesis and Role of Transfer Layer / Mechanically Mixed in Wear of Materials, India, December 1998, Wear, Vol.245, 2000
	G. Sundararajan and M Roy, “Hardness Testing”, A Chapter in Encyclopaedia of Materials: Science and Technology, Elsevier Science Ltd, p 3728-3736, 2001
	G. Sundararajan and Y Tirupataiah, “The Localization of Plastic Flow under Dynamic Indentation Conditions: I. Experimental Results”, Acta Materialia, Vol. 54, p 565-575, 2006
	G. Sundararajan and Y Tirupataiah, “The Localization of Plastic Flow under Dynamic Indentation Conditions: II. Analysis of Results ”, Acta Materialia, Vol. 54, p 577-586, 2006
	G. Sundararajan, M Stack and M Roy (eds.), Proceedings of International Symposium on Tribo Corrosion, Special Issue of Tribology International, 2007 (In press)
	G. V. Narasimha Rao and T Sakuntala, “X-ray Powder Diffraction Study of K3H(SO4)2”, Powder Diffraction, Vol.14(1), p 45-46, 1999
	K. Byrappa, B.V. Suresh Kumar, G. V. Narasimha Rao, M.S. Vijaya Kumar and C. Ranganathaiah “Synthesis and Characterization of R3+ : AlPO4 (where R=Ce, Pr and Nd)” Materials Research Innovations, Vol. 11(3), p 122-126, 2007
	M Roy, K K Ray and G. Sundararajan, “An Analysis of the Transition from Metal Erosion to Oxide Erosion”, Wear, Vol. 217, p 312-320, 1998
	M Roy, K K Ray and G. Sundararajan, “Erosion Oxidation Interaction: Elevated Temperature Erosion of Ni and Ni-20Cr Alloy”, Metallurgical and Materials Transactions A, Vol. 32 (A) , p 1431-1451, 2001
	M Roy, K K Ray and G. Sundararajan, “The Influence of Cr Addition on the Elevated Temperature Erosion for Ni Alloy”, Proceedings of International Corrosion Conference (CORCON-97), India, p 588-594, 1997
	M Roy, K K Ray and G. Sundararajan, “The Influence of Erosion-Induced Roughness on the Oxidation Kinetics of Ni and Ni-20Cr Alloys”, Oxidation of Metals, Vol. 51(3-4), p 251-272, 1999
	N Rajan, K G M Nair, G. V. Narasimha Rao, L S Vidyanathan, V S Sastry, P Magudapathy, K Krishan and T S Sampath Kumar, “Transformation of (0002)-Oriented Ti Film into (111) TiN through Nitrogen Implantation”, Applied Physics A, Vol. 70, p 65-68, 2000
	R Venkataraman, G Das, B Venkataraman, G. V. Narasimha Rao and R Krishnamurthy, “Image Processing and Statistical Analysis of Microstructures of as Plasma Sprayed Alumina-13 wt. % Titania Coatings”, Surface & Coatings Technology, Vol. 201, p 3691-3700, 2006
	Roy Johnson, I. Ganesh, Bhaskar Prasad Saha, G. V. Narasimha Rao and Y R Mahajan, “Solid State Reactions of Cordierite Precursor Oxides and Effect of CaO Doping on the Thermal Expansion Behaviour of Cordierite Honeycomb Structures”, Journal of Materials Science, Vol. 38, p 2953-2961, 2003
	S Kalavathi, J Janki, G V R Reddy, G. V. Narasimha Rao, V S Sastry and Y Hariharan, “Crystal Structure, Superconductivity and Magnetic Properties of the Superconducting Ferromagnets Gd1.4-XDyxCe0.6Sr2RuCu2O10 (x=0-0.6)”, Physica C, Vol. 390, p 296-304, 2003

Centre for Mechanical and Microstructural Characterization

	B Venkataraman and G. Sundararajan, “The Influence of Sample Geometry on the Friction Behaviour of Carbon-Carbon Composites”, Acta Materialia, Vol. 50, p 1153-1163, 2002
	B Venkataraman, A K Mukhopadhyay and G. Sundararajan, “The Evaluation of the Inherent Resistance to Ballistic Penetration of High Strength Aluminium Alloys using a High Velocity Gas Gun”, Proceedings of the 16th International Ballistic Symposium, Ballistics-1996, U.S.A, Vol. 3, p 339-348,1996
	B Venkatraman and G. Sundararajan, “Correlation Between the Characteristics of the Mechanically Mixed Layer and Wear Behaviour of Aluminium, Al-7075 Alloy and Al-MMCs”, Wear, Vol. 245, p 22-38, 2000
	C M Reddy, G. Ravichandra, S Basavoju, M T Kirchner, K A Padmanabhan and G R Desiraju, “Structural Basis for Bending of Organic Crystals”, Chemical Communications, p 3945-3947, 2005
	C M Reddy, M T Kirchner, G. Ravichandra, K A Padmanabhan and G R Desiraju, “Isostructurality, Polymorphism and Mechanical Properties of some Hexahalogenated Benzenes: The Nature of Halogen…Halogen Interactions”, Chemistry : A European Journal, Vol. 12, p 2222-2234, 2006
	G. Sundararajan and D A Rigney (eds.), Proceedings of International Symposium on a Genesis and Role of Transfer Layer / Mechanically Mixed in Wear of Materials, India, December 1998, Wear, Vol.245, 2000
	G. Sundararajan and M Roy, “Hardness Testing”, A Chapter in Encyclopaedia of Materials: Science and Technology, Elsevier Science Ltd, p 3728-3736, 2001
	G. Sundararajan and Y Tirupataiah, “The Localization of Plastic Flow under Dynamic Indentation Conditions: I. Experimental Results”, Acta Materialia, Vol. 54, p 565-575, 2006
	G. Sundararajan and Y Tirupataiah, “The Localization of Plastic Flow under Dynamic Indentation Conditions: II. Analysis of Results ”, Acta Materialia, Vol. 54, p 577-586, 2006
	G. Sundararajan, M Stack and M Roy (eds.), Proceedings of International Symposium on Tribo Corrosion, Special Issue of Tribology International, 2007 (In press)
	G. V. Narasimha Rao and T Sakuntala, “X-ray Powder Diffraction Study of K3H(SO4)2”, Powder Diffraction, Vol.14(1), p 45-46, 1999
	K. Byrappa, B.V. Suresh Kumar, G. V. Narasimha Rao, M.S. Vijaya Kumar and C. Ranganathaiah “Synthesis and Characterization of R3+ : AlPO4 (where R=Ce, Pr and Nd)” Materials Research Innovations, Vol. 11(3), p 122-126, 2007
	M Roy, K K Ray and G. Sundararajan, “An Analysis of the Transition from Metal Erosion to Oxide Erosion”, Wear, Vol. 217, p 312-320, 1998
	M Roy, K K Ray and G. Sundararajan, “Erosion Oxidation Interaction: Elevated Temperature Erosion of Ni and Ni-20Cr Alloy”, Metallurgical and Materials Transactions A, Vol. 32 (A) , p 1431-1451, 2001
	M Roy, K K Ray and G. Sundararajan, “The Influence of Cr Addition on the Elevated Temperature Erosion for Ni Alloy”, Proceedings of International Corrosion Conference (CORCON-97), India, p 588-594, 1997
	M Roy, K K Ray and G. Sundararajan, “The Influence of Erosion-Induced Roughness on the Oxidation Kinetics of Ni and Ni-20Cr Alloys”, Oxidation of Metals, Vol. 51(3-4), p 251-272, 1999
	N Rajan, K G M Nair, G. V. Narasimha Rao, L S Vidyanathan, V S Sastry, P Magudapathy, K Krishan and T S Sampath Kumar, “Transformation of (0002)-Oriented Ti Film into (111) TiN through Nitrogen Implantation”, Applied Physics A, Vol. 70, p 65-68, 2000
	R Venkataraman, G Das, B Venkataraman, G. V. Narasimha Rao and R Krishnamurthy, “Image Processing and Statistical Analysis of Microstructures of as Plasma Sprayed Alumina-13 wt. % Titania Coatings”, Surface & Coatings Technology, Vol. 201, p 3691-3700, 2006
	Roy Johnson, I. Ganesh, Bhaskar Prasad Saha, G. V. Narasimha Rao and Y R Mahajan, “Solid State Reactions of Cordierite Precursor Oxides and Effect of CaO Doping on the Thermal Expansion Behaviour of Cordierite Honeycomb Structures”, Journal of Materials Science, Vol. 38, p 2953-2961, 2003
	S Kalavathi, J Janki, G V R Reddy, G. V. Narasimha Rao, V S Sastry and Y Hariharan, “Crystal Structure, Superconductivity and Magnetic Properties of the Superconducting Ferromagnets Gd1.4-XDyxCe0.6Sr2RuCu2O10 (x=0-0.6)”, Physica C, Vol. 390, p 296-304, 2003

Centre for Technology Acquisition, Transfer and International Cooperation

	G. Sundararajan and H Purushotham, “The Transfer of Material Related Technologies to Indian Industries: ARCI Experience”, Proceedings of 1999 R&D Management Conference-R&D as a Business, p 316-322, 1999
	H Purushotham, Sanjay Bharadwaj and G. Sundararajan, “An Integrated Technology Incubation Model for Innovation and High Technology Enterprise Development”, Proceedings of R&D Management Conference 2002, Delhi, p 169-181, 2002